- 16
- 32
- 64
- 2
- 3
- 4
AR-15 Buffer System: Tubes, Buffers and Weights
The buffer tube, or receiver extension, threads into the back of the lower receiver and holds the buffer and spring. Your stock rides on it too, so the tube has to match the stock. Buffer weight is then the simplest way to tune how the rifle cycles: a heavier buffer slows the bolt carrier, which helps a rifle that runs too hard, especially when it is suppressed or over-gassed. The whole buffer system is on this page.
Buffer tubes and kits
- Geissele Premium MIL-SPEC buffer tube: carbine length, mil-spec diameter and six stock positions, machined from 7075-T6 aluminum with Type 3 hardcoat, in OD green.
- SOLGW Maritime buffer tube kit: a complete intermediate 10-position assembly with a 5.6 oz buffer, extra power spring, QD end plate and SOLGW castle nut.
Buffers, weights and spacers
- Tungsten buffer weights: a direct replacement for the steel weights in an AR-15 carbine buffer. Tungsten is much denser than steel, so the same buffer gets heavier. A standard carbine buffer holds three steel weights, and H, H2 and H3 buffers swap one, two or all three of them for tungsten.
- Rubber buffer weight spacers: neoprene spacers that go between the weights to soften the impact under recoil, in mil-spec 3/32 inch, 1/16 inch and 1/8 inch. The 1/16 inch spacer gives more of a dead blow effect in a pistol caliber carbine.
- ODIN Works adjustable buffers: one buffer body with a set of aluminum, stainless steel and tungsten weights you combine until the rifle cycles the way you want. Made in AR-15 Heavy, AR-15 Lite, AR-10 and 9mm versions.
Frequently Asked Questions
Mil-spec or commercial buffer tube: which do I need?
Match the tube to your stock. Mil-spec and commercial tubes differ slightly in outside diameter, and a stock made for one will not fit the other properly. The Geissele tube is mil-spec diameter, which fits most quality AR-15 stocks.
How much buffer weight does my AR need?
It depends on the gas system, barrel length, ammunition and whether you shoot suppressed. Start with the buffer made for your platform, add weight if the rifle cycles harshly, and test with the ammunition you plan to shoot.
Should I buy tungsten weights or an adjustable buffer?
Tungsten weights upgrade the carbine buffer you already have and are the simple fix when you know you need more weight. An adjustable buffer replaces the buffer and lets you add or remove weight as you change barrels, ammunition or suppressors.
Will these fit an AR-10 or a 9mm AR?
The tungsten weights and rubber spacers are listed for AR-15, AR-10 and AR-9 buffers. ODIN Works makes separate adjustable buffers for the AR-15, AR-10 and 9mm, so pick the one made for your rifle.

















