AR15 / M4 / M16 / SR25 / M110 / AR10

Magpul AR grips for AR-15, M4, M16, AR-10 and SR-25 pattern rifles: drop-in pistol grips in several angles and sizes, plus grip storage cores.

AR15 / M4 / M16 / SR25 / M110 / AR10

Magpul AR grips for AR-15, M4, M16, AR-10 and SR-25 pattern rifles: drop-in pistol grips in several angles and sizes, plus grip storage cores.

SHOW
  • 16
  • 32
  • 64
VIEW
  • 2
  • 3
  • 4

Magpul AR Grips: MOE, K2, SL and MIAD

Every grip in this section is a drop-in replacement for the standard AR pistol grip. The differences are angle, size, texture and storage. Here is what each family does.

  • MOE: the baseline Magpul AR-15 grip, with an angle close to the factory grip and a textured polymer body.
  • MOE-K and MOE-K2: a steeper, more vertical angle. The K is the compact one, the K2 is full size, and the K2-XL is a larger K2 for big hands.
  • MOE SL: slim line with a vertical angle, made for short length-of-pull setups.
  • MOE+ and K2+: reinforced polymer with wrap-around rubber overmolding for a softer, grippier hold.
  • MIAD GEN 1.1: interchangeable straps and two configurations (Type 1 and Type 2) to fit most AR-15 and AR-10 receivers.

Grip storage cores

MIAD/MOE cores slide into the hollow of compatible grips. We carry cores for a spare AR-15 bolt and firing pin, two AA batteries, two CR123A batteries, and one with a refillable half-ounce lube bottle.

Building or refinishing the whole rifle? See Magpul AR stocks, our AR-15 parts and our custom Cerakote service.

Frequently Asked Questions

Do Magpul AR-15 grips fit an AR-10?

This section covers AR-15, M4, M16, SR-25, M110 and AR-10 pattern rifles. Most AR-10 lowers take the same grip as an AR-15, and the MIAD is listed for both. If your lower is an uncommon pattern, send us the make and model first.

Which Magpul AR grip has the most vertical angle?

The MOE-K, MOE-K2, K2+, K2-XL and MOE SL all sit more upright than the standard MOE. Choose the K for the most compact grip, or a K2 if you want that angle with a full-length grip.

Do I need special tools to swap an AR grip?

No. A screwdriver or hex key for the grip screw is enough on most rifles. The safety selector detent and spring sit under the grip, so work over a bench and don’t lose them when the old grip comes off.

SHOPPING BAG 0